AVer IWH5000 Series User Manual Download

Page: 155 / 247

147

5.9.5

To Setup Alarm Recording Setting

1. Next to the Start Recording check box, click

Detail

2. In the Alarm Recording Setting dialog box, select the camera to enable/disable video

recording. Enable

All

to select all cameras.

3. In the Frame Rate selection, select

As Setting

to record the number of frames based on the

Recording Setting or

Max

to record

the

maximum of frames based on the available speed.

4. In the Stop Recording after text box, set the number in second for the program to continue

recording after the alarm has ended.

5. Click

to accept the new settings and

Cancel

to exit without saving.

Summary of Contents for IWH5000 Series
























































































































































































































































Search results

Summary of Contents for IWH5000 Series

Reviews:

Related manuals for IWH5000 Series

Brands by name

Popular brands

AVer IWH5000 Series, User Manual

Search results

Summary of Contents for IWH5000 Series

Reviews:

Related manuals for IWH5000 Series

Brands by name

Popular brands