
57
Event > Arrangement > Preference
Record File:
File Format: IP camera allows 3 different types of recording file to change its record size.
When motion/alarm is triggered, there are 3 different types of record mode.
−
AVI File (With Record File Setting )
−
JPEG Files (With Record File Setting), only with MJPEG compression format.
−
Single JPEG (Single File with Interval Setting) (JPEG photo).
Pre Alarm and Post Alarm: Setups for video start and end time when motion detected, I/O, or
other devices got triggered.
[Note] Pre/Post Alarm record time is base on record time setting and IP camera
memory. Limited by IP camera built-in Ram Memory, when information is too much or video
set too high, it will cause recording frame drop or decrease on post alarm recording time.
Network Connected: When the network is down, it will save the video to local
[Note]This function is only enabled in wire connection.
Network IP check: When the connection is down, it records the video to
sure the video recording is continuous. To use this function, key in the IP address of the PC which
has recording software installed. Enable the function of “Save to SD card”, then click “
[Note] The interval of two video files on SD/SDHC card is fixed with 30 seconds.
ENGLISH
different types of recording file to change its record size.
When motion/alarm is triggered, there are 3 different types of record mode.
JPEG compression format.
etups for video start and end time when motion detected, I/O, or
camera built-in Ram
information is too much or video quality
set too high, it will cause recording frame drop or decrease on post alarm recording time.
When the network is down, it will save the video to local SD/SDHC card.
to SD/SDHC card. Make
s. To use this function, key in the IP address of the PC which
”, then click “Apply”.
card is fixed with 30 seconds.