48
2.6.2.1
Setup Transmitting Camera
Select and click on the camera number in the Transmitting Camera section you want to make it
accessible via internet using PCViewer, Remote site control, and iPhone/Andorid Viewer. To
select all the cameras, enable the
ALL
check box.
2.6.2.2
Setup UPnP
Assign a port number for UPnP service. Click
OK
to save the setting.
This function is working when the router had enabled the UPNP function and had opened the
port, which had assigned for UPNP setting, for the NVR/DVR system.
2.6.2.3
Setup Bandwidth Limit
Set the network bandwidth consumption limit for remote accessing. Click
OK
to save the
setting.
Summary of Contents for E5016
Page 1: ...E5000 series E5016 E5016H User Manual V 2 3 1 3 ...
Page 58: ...49 2 6 2 4 Setup Network Port Assign a Network Port for remote accessing connection ...
Page 70: ...61 2 8 Camera Management Connect and configure the IP camera Click Setup tab Camera Setting ...
Page 113: ...104 13 To delete the alarm select the alarm that user wants to delete and click Delete button ...
