28
Operating the Camera
Make a Video Call
1.
Make sure all devices (CAM550, laptop/PC, TV/monitor) are well connected and powered on.
2.
Run your video application (
Zoom, Microsoft
®
Teams, Skype for Business, Skype, Google Meet,
Intel
®
Unite™, RingCentral, BlueJeans, V-Cube, LiveOn, CyberLink U Meeting
®
, TrueConf,
Adobe Connect, Cisco WebEx
®
, Fuze, GoToMeeting™, Microsoft
®
Lync™, Vidyo, vMix, WebRTC,
Wirecast, XSplit,
etc.) on your PC or laptop.
3.
Set the CAM550 camera as the primary camera for your video application (refer to your video
application user guide). You can now make your call.
[Note]
The CAM550 is a plug-and-play conference camera. The system requires no special drivers,
but we do recommend installing the PTZApp 2 for a better user experience. For information on how to
install and use the PTZApp 2, refer to the PTZApp 2 section in this user manual.
Make a Connection through the Browser
CAM550 has an Ethernet port for IP streaming and allows administrators to remotely control and set
up the camera via an internet access. Moreover, CAM550 also supports RTSP and RTMP functions.
For more details, please contact our technical support.
1.
Make sure the CAM550 has an internet access connection.
2.
Launch PTZApp 2* (
) and connect CAM550 to PC with USB cable
.
The camera default IP
address is
192.168.1.168
.
[Note]
The browser supports:
Chrome: version 76.x or above
Firefox: version 69 or above
IE: Doesn’t support