AVer CAM520 Pro2, User Manual, Page: 11 / 83

3
Remote Control
Name Function
1. Camera Select One remote can control up to 3 AVer
VC/CAM/VB series cameras. You can
use AVer PTZApp 2 to set numbers
associated with each camera, and
then select which camera you would
like to control using the remote.
[Note] If you only have one camera
and don’t need to do any setting, the
default is camera 1. If you press
camera 2 or 3 on the remote control,
you will find your remote can’t control
your camera. In this case, please
press camera 1 on your remote again.
2. Camera Directional
Control
Use the directional buttons on the
remote to control the direction of the
camera. Press the directional button to
move the camera or press and hold to
continuously pan or tilt.
3. SmartFrame One-click automatic FOV adjustment
to fit all participants.
Press for 1 second to switch the
SmartFrame function among Manual
Framing/Auto Framing/Preset Framing
modes. A message (as figures shown)
will display on the screen to indicate
the mode.
[Notes]
 SmartFrame deploys face and
body detection technology. People
wearing masks and side facial
profiles can still be detected. The
maximum detection distance is
7~10 meters.