www.avenview.com
Page 11
7.
GENERAl TRouBlESHooTING
PROBLEM
POSSIBLE SOLUTION
THE WIRELESS OR VIDEO
LINK LED IS NOT LIT
•
If the transmitter and /or Receiver are positioned horizontally
move the units to vertical position. power cycle both extender
units
(OFF 30 sec then ON).
•
Reduce the distance between the Transmitter and Receiver units.
power cycle both extender units
•
(OFF 30 sec then ON).
MENU
•
Re-check all connections and verify they are in the correct
positions and verify the units are powered.
•
Check that the wireless and Video link lEDs are lIT
EXIT
•
Check the IR Extender cable is connected to the Transmitter unit
•
Check that the IR EyE is visible and not being obstructed and the
transmission of IR from the remote can be sent.
•
Reposition the IR flasher to another location near the IR port of
your source device
SOURCE
•
Reduce the distance (less than 1 meter) between the transmitter
and receiver units and then reconnect power adapter.
•
If no picture after Step 1, press REG button on IR remote pointing
towards the transmitter (don’t hold REG button).
•
If no picture after Step 1 and step 2, delete the source and re-add
the Transmitter.
