www.avenview.com
Page 6
C.
Temperature
1.
Temperature 1
2.
Temperature 2
these figures shows the temperature of the device inside.
D.
L
CM Contrast Range from 1~4
6.
PAGE:
This button allows the user to navigate through the different page info displayed.
7.
SAVE:
Saves the preset settings of the I/O. 3 preset save spaces available.
8.
RECALL:
press this button to recall from the saving settings of 1~3.
9.
ENTER:
To Confirm or Enter the selection
10.
All:
select all outputs source.
11.
OUT/IN:
Select input source to displaying on output display. The sequence should be O
U
T/IN —> number(s) for
out-put source —> O
U
T/IN —> a number for input display —>Enter.
12.
0~9:
press these numbers when selecting input output ports.
13.
+:
When selecting more than one output for an input selection. This button works correspondingly with O
U
T/IN
but
t
on
s
only.
2.2.
2
INPUT PANEL (TRANSMITTER, HBT-C6POE-SP8) Rear
14.
OUTPUT 1~16:
Connect to HD or 3D screens /monitors with HDMI cables up to 16 displays.
15.
CPU
A.
RS-232: Connect with D-Sub 9-pin cable from the
P
C/
L
aptop device for RS-232 control over
the Matrix or the connected device(s).
B.
CONTRO
L
: Connect to an active network line for
L
AN serving and Telnet/Web G
U
I control.
C.
IR O
U
T/IN: Reserved.
D.
SERVICE: This port is reserved for firmware update only.
E.
O
U
T
PU
T 0: Connect to DVI/HDMI (with DVI to HDMI adaptor) screen/monitor for local
output monitoring
16.
INPUT 1~16:
Connect to source equipment such Blu-ray/Set Top Box players up to 16 sets with HDMI cables.
17.
POWER & POWER Supply:
The device will automatically turns ON when power is supplied.
18.
VENTILATION FAN:
This fan will automatically turns ON when the device is switch to ON. Do not block this
port
of the
device or cover it with any object. please allow adequate space around the unit for air circulation.
