Avenview HDM-C6IP-S, User Manual

Page: 10 / 16

www.avenview.com
Page 7
2.3 DEvICE DESCRIpTION & lAyOuT
This product is composed of a Transmitter and a Receiver.
2.3.1 Front Panel & Rear Panel (Transmitter, HDM-C6IP-S)
1 CAT5E/6: plug in a Cat-5E/6 cable that needs
to be linked to the receiving unit 3 +5V DC: Connect to 5v DC power supply.
2 SELECT: To pair with the corresponding
Transmitter unit. 4 HDMI IN: Connects to a HDMI source with a HDMI
male-male cable.
2.3.2 Front Panel & Rear Panel (Receiver, HDM-C6IP-R)
1
CAT5E/6: plug in a Cat-5E/6 cable that needs to
be linked to the receiving unit
3
+5V DC: Connect to 5v DC power supply.
2 SELECT: To pair with the corresponding
Transmitter unit. 4 HDMI OUT: Connects to a HDMI source with a
HDMI male-male cable.
• Each Transmitter and Receiver after pairing support only point to point operation. It cannot support signals
broadcasting by HDMI.
• Important Before starting the insulation please ensure that all devices are powered OFF
1
1
2
2
3
3
4
4