www.avenview.com
Page 12
6
“Fine Tune by Percentage”
provides the alternative to further adjust the position and area defined in section
5.
For Outward Extension
For Inward Shrink
By percentage, users need to determine what will be the reference. There are two choices for this part
“Specified
Area”
and
“Full Input”.
“Specified Area”
will work more appropriately while users are dealing with panel masking,
because the overlapped masking area will be closed to specified area instead of full input video.
7
“Fine Tune by Pixel”
offers similar approach to adjust the position and area of the Output channel. The idea behind
this section is the same as
“Fine Tune by Percentage”
. The difference is that the adjustment is based on Pixels. Users
can therefore adjust the Output Channel area by One Pixel increments
2x2 VIDEOWALL SETUP DVI OR HDMI
Hardware
Please connect DVI or DVI/HDMI cable Output 1 to Monitor 1
Please connect DVI or DVI/HDMI cable Output 2 to Monitor 2
Please connect DVI or DVI/HDMI cable Output 3 to Monitor 3
Please connect DVI or DVI/HDMI cable Output 4 to Monitor 4
Software
1. Click on Display Output 1
2. In display area setting set the X Total: 2 / Y Total: 2 for 2x2 Setup
8.
EXAMPLE OF 2X2 VIDEOWALL SETUP
1
1
2
3
4
3
2
4
Note: Display Area
Setting Values
Summary of Contents for DVI-VIDEOWALL-9X
Page 7: ...www avenview com Page 4...
