Page|8
www. avenview.com
3
.
INSTALLATION (DVI-PROWALL-
9
X )
1. Connect
your source device such as digital signage player
to DVI/HDMI Inputs on the DVI-PROWALL-
9
X.
2. Connect all display
s/screens
to DVI/HDMI Outputs on the DVI-PROWALL-
9
X.
3.
Power up
the DVI-PROWALL-
9
X.
GENERAL INSTRUCTIONS
1. Before you begin the software installation from the CD provided or latest CS from the website, please ensure the
DVI-PROWALL-
9
X is connected to AC power and your PC via USB or connected to the same network as the
DVI-PROWALL-
9
X
2. PC Requirements-Windows® XP/Windows Vista®/Windows® 7
3. Ensure your
l
aptop or desktop is plugged into AC power during the update process. It is not recommended to use only
battery power during the installation. Do not remove power at any time during the process as this could lead to
incomplete
results. See Section 5 Operation Method B Software
C
ontrol for more info
rmation
.
4
.
Switch on all devices connected and then control the display output through RS-232, Ethernet and software.
