4x4 HDMI 2.0 Matrix Kit
10
5. Button Control
The matrix can be controlled by using the buttons on the front panel. Whenever a
command is accepted, the indicators of all the buttons pressed will blink three times
then they will go off. If the command fails, the indicators will go off immediately without
blinking.
5.1 Signal Switching
⚫
Switch an input to an output
Operation: INPUT# + OUTPUT# + ENTER
Example: Switch Input 1 to Output 2:
INPUT:
OUTPUT:
Note: In default status, 4 IR OUT ports correspond with 4 HDMI INPUTS. When you
switch an HDMI input, the corresponding IR OUT will be switched synchronously.
⚫
Switch an input to several outputs
Operation: INPUT# + OUTPUT# + OUTPUT# +… + ENTER
Example: Switch Input 1 to Output 2, 3, and 4.
INPUT:
OUTPUT:
⚫
Switch an input to all outputs
Operation: INPUT# +ALL + ENTER
Example: Switch Input 1 to all outputs.
INPUT:
