Avaya X330W-2DS1, User Manual, Page: 87 / 176

Layer 3 CLI Commands
Avaya X330W-2DS1 User’s Guide 65
Router-N(configure)# no arp timeout
clear arp-cache
Use the
clear arp-cache
command to delete all dynamic entries from the ARP
cache and the IP route cache.
The syntax for this command is:
clear arp-cache
[<vlan>|<ip addr>[<mask>]]
Examples:
clear arp-cache
Flush all ARP entries.
clear arp-cache marketing_vlan
Flush ARP entries for a VLAN.
clear arp-cache 30
Flush ARP entries for a VLAN ID.
clear arp-cache 192.168.0.0 255.255.0.0
Flush range of ARP entries belonging
to one subnet.
clear ip route
Use the
clear ip route
command to delete all the dynamic routing entries from
the Routing Table.
The syntax for this command is:
clear ip route * | <ip-addr> [<ip-mask>]
Examples:
clear ip route *
Clears all the routing table.
clear ip route 192.168.49.1 255.255.255.0
Clears a range of entries.
default-metric (Interface context)
Use the
default-metric
command to set the interface RIP route metric value.
The
no
form of this command restores the default value ( 1) .
vlan VLAN string (up to 16 characters) or VLAN ID
number
ip addr IP address
mask IP mask
ip-addr IP address
ip-mask IP mask address