Avaya X330W-2DS1, User Manual, Page: 84 / 176

Chapter 7 X330WAN CLI Commands
62 Avaya X330W-2DS1 User’s Guide
Last warning : No-warning
show time
Use the
show time
command to display the current device time.
The syntax for this command is:
show time
Output Example:
X330WAN-2DS1-1(super)#
show time
10:32:34 27 JAN 2000 GMT
show time parameters
Use the
show time parameters
command to display the status and
parameters.
The syntax for this command is:
show time parameters
X330WAN-2DS1-1(super)# show time parameters
Client status: Enabled
Current time : L:01:38:31 01 JAN 1970 GMT
Timezone set to 'GMT', offset from UTC is 0 hours
Time-Server : 0.0.0.0 (I.e. broadcast address)
Time acquired from Time-Server: 0.0.0.0
Time protocol set to : TIME protcol
show timezone
Use the
show timezone
command to display the current device timezone.
The syntax for this command is:
show timezone
Output Example:
X330WAN-2DS1-1(super)#
show timezone
Timezone set to 'GMT', offset from UTC is 0 hours
sync time
Use the
sync time
command to synchronize the time.