Avaya X330W-2DS1, User Manual, Page: 154 / 176

Chapter 7 X330WAN CLI Commands
132 Avaya X330W-2DS1 User’s Guide
X330WAN-2DS1-1(configure)# interface FabricFastEthernet 1:1
X330WAN-2DS1-1(configure)# no interface FabricFastEthernet 1.1
interface FastEthernet
Use the
interface FastEthernet
command to create and/or enter Interface
Fast Ethernet configuration mode (context). For LAN interfaces, use this command
to create the interface. Use the
no
form of this command to delete an IP interface.
The syntax for this command is:
[no] interface FastEthernet [interface number[.ip-interface]]
Examples:
X330WAN-2DS1-1(configure)# interface FastEthernet 1
X330WAN-2DS1-1(configure)# interface FastEthernet 1.1
X330WAN-2DS1-1(configure)# no interface FastEthernet 1.1
interface Loopback
Use the
interface Loopback
command to create and/or enter interface
Loopback configuration mode (context). Use the
no
form of this command to delete
a Loopback interface or an IP interface.
The syntax for this command is:
[no] interface Loopback [<interface number>[.ip-interface]]
Examples:
X330WAN-2DS1-1(configure)# interface Loopback 1
interface
number An integer with a value of 1.
ip-interface The IP interface number within this interface (as a number of IP
interfaces might be bound to an L3 interface). An integer
between 0 and 1024.
interface
number An integer between 0 and 99.
ip-interface The IP interface number within this interface (as a number of IP
interfaces might be bound to an L3 interface). An integer
between 0 and 1024.