Avaya X330W-2DS1, User Manual, Page: 130 / 176

Chapter 7 X330WAN CLI Commands
108 Avaya X330W-2DS1 User’s Guide
Example:
X330WAN-2DS1-1(configure)# ip composite-op dscp 101 17 52
ip composite-op name
Use the
ip composite-op name
command to set the name of a policy operation.
Note: This command is only supported by the X330WAN module.
The syntax for this command is:
ip composite-op name <policy-list-number> <composite-op-index>
<OpName>
Example:
X330WAN-2DS1-1(configure)# ip composite-op name 101 17 gold-
account
ip composite-op notify
Use the
ip composite-op notify
command to set the trap mode of a composite
operation in a policy list.
Note: This command is only supported by the X330WAN module.
dscp value DSCP entry, an integer (0-63), where 64 - no
change).
policy-list-number An integer (100..149), where 0 is the default
list.
composite-op-index Index of operation in the table.
OpName The name you are givng the policy operation.