Avaya X330W-2DS1, User Manual, Page: 126 / 176

Chapter 7 X330WAN CLI Commands
104 Avaya X330W-2DS1 User’s Guide
ip access-list-dscp operation
Use the
ip access-list-dsc operation
command to set a DSCP to action.
Note: This command is only supported by the P333R-LB device and X330WAN
module.
The syntax for this command is:
ip access-list-dscp operation <policy-list-number> <dscp>
<action>
Example:
X330WAN-2DS1-1(super)#
ip access-list-dscp operation 101 9-16
fwd3
ip access-list-dscp name
Use the
ip access-list-dscp name
command to set a DSCP name.
Note: This command is only supported by the P333R-LB device and X330WAN
module.
The syntax for this command is:
ip access-list-dscp name <policy-list-number> <dscp> <name>
policy-list-number An integer (100..199), or for the X330WAN
(100..149), where 0 is the default list.
dscp Range of DSCP
action Action name
policy-list-number An integer (100..199), or for the X330WAN
(100..149), where 0 is the default list.
dscp DSCP entry (0-63)
name Entry name