Avaya X330W-2DS1, User Manual, Page: 120 / 176

Chapter 7 X330WAN CLI Commands
98 Avaya X330W-2DS1 User’s Guide
The syntax for this command is:
show ip vrrp [<vlan> [router-id <vr-id>]][detail]
Output Example:
X330WAN-2DS1-1(configure)# show ip vrrp
VRRP is globally enabled
VLAN VRID IP Address Pri Timer State Since
----- ----- ------------- ---- ------- --------- -----------
1 1 192.168.66.23 255 1 MASTER 00:00:00
1 2 192.168.66.24 100 1 BACKUP 00:00:00
show ip vrrp detail
Use the
show ip vrrp detail
command to display full VRRP-related
information
The syntax for this command is:
show ip vrrp detail
Output Example:
X330WAN-2DS1-1(configure)#
show ip vrrp detail
VRRP is globally enabled
Virtual Router on VLAN:
1
Router-id: 1
State: MASTER
Priority: 255
Advertisement Interval: 1
Last State Change: 00:00:00
Override Address Ownership Rule: No
Authentication Type:
None
Authentication Key: ""
Master IP Address
192.168.66.23
Has 1 IP addresses
vlan Filter by Fabric.
router-id Filter by virtual router ID (1-255).
vr-id The virtual router ID.
detail Provide detailed information.
detail Show full detail information