Avaya X330W-2DS1, User Manual, Page: 119 / 176

Layer 3 CLI Commands
Avaya X330W-2DS1 User’s Guide 97
The syntax for this command is:
show ip route static
[<ip addr> [<mask>] ]
Examples:
Output Example:
Router-1 (super)# show ip route static
X330WAN-2DS1-1(super router:ospf)# show ip route static
Showing 1 rows
Network Mask Interface Next-Hop Cost Pref Perm Active
--------------- ---- -------------------- --------------- ---- ---- ---- ----
0.0.0.0 0 FastEth 1 149.49.75.1 1 low No Yes
show ip route summary
Use the
show ip route summary
command to display the number of routes
known to the device.
The syntax for this command is:
show ip route summary
Output Example:
X330WAN-2DS1-1(super router:ospf)# show ip route summary
X330WAN-2DS1-1(super)# show ip route summary
Route Source Networks Subnets
---------------- ---------------- ----------------
Local 0 1
Static 0 1
Total 0 2
Use the
show ip vrrp
command to display VRRP information.
ip-address The IP address of the routes
mask The ip mask of the routes
show ip route static
Display all static routes
show ip route static 137.32.50.13
Display a single static route
show ip route static 137.44.50.13 255.255.255.0
Display range of static routes