Avaya X330W-2DS1, User Manual, Page: 115 / 176

Layer 3 CLI Commands
Avaya X330W-2DS1 User’s Guide 93
Output Example:
X330WAN-2DS1-1(super router:ospf)# sho ip ospf database
Showing 1 rows
Area Type LSA ID Router ID Sequence Age Cksm
--------------- ----- --------------- --------------- -------- ----- ----
0.0.0.0 RTR 149.49.75.71 149.49.75.71 80000001 567 139b
show ip ospf interface
Use the
show ip ospf interface
command to display the OSPF-related
interface information.
The syntax for this command is:
show ip ospf interface [<interface-name>]
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
Output Example:
X330WAN-2DS1-1(super router: ospf)# show ip ospf interface
There are no OSPF interfaces
show ip ospf neighbor
Use the
show ip ospf neighbor
command to display OSPF-neighbor
information on a per-interface basis.
external Displays information only about the external LSAs.
Optional.
network Displays information only about the network LSAs.
Optional.
network-summary Displays information only about the network LSAs
summary. Optional.
router Displays information only about the router LSAs.
Optional.
interface-name A string, the OSPF interface name