manualshive.com logo in svg

Avaya WLAN 8100 Series, Reference, Page: 37 / 382

Share
Download
Avaya WLAN 8100 Series Reference Download Page 37

The following are the command options to configure images in Captive Portal
locales:

 Important:

Ensure that the image files satisfy the following criteria:

• The image file format is one of 

.jpg

, 

.gif

, 

.png

, 

.tif

 or 

.bmp

.

• The size of custom images (logo, background, logout image) must not

exceed 1Mb each.

• The image filename does not exceed 31 characters.

WC8180(config-cp-locale)#image ?

  account            Set image name for accounting identification

  background         Set image name for background appearence

  branding           Set image name for branding appearence

  logout-background  Set image name for logout background appearence

WC8180(config-cp-locale)#image

Example

The following is a sample usage of the command 

wip-msg

 to set a message indicating that

authentication is in progress:

WC8180(config-cp-locale)# wip-msg 0074006500730074

In the above example, 

0074006500730074

 is the UTF 16 equivalent of the word 

test

.

Customizing Captive Portal using static HTML pages

Use this procedure to customize the Captive Portal user login experience using static HTML
pages.

Captive Portal customization using static HTML pages helps you update only those Web pages
that are displayed during the Captive Portal 

user login process

 (that is, during user

authentication).

After successful authentication, a standard HTML page is used to display a welcome message
to the user. You can however specify a redirect URL to redirect the user to, like a corporate
portal page or a service main page. For more information on configuring the redirect URL, see

Redirecting the URL for captive portals

 on page 34.

Before you begin

• You have configured the TFTP server IP address on the controller, using the following

command:

In this example, 

172.16.1.11

 is a sample TFTP server IP address.

WC8180#config t

Enter configuration commands, one per line.  End with CNTL/Z.

ACLI reference for the Wireless LAN (WLAN) 8100

Avaya WLAN 8100 CLI Reference

August 2013     37

Summary of Contents for WLAN 8100 Series































































































































































































































































































































































































Reviews:

No comments