Avaya W310, Command Reference Manual

Page: 390 / 440

Chapter 16 System Commands
374 Avaya W310 Command Reference Guide
set time server
User level: privileged, supervisor.
Use the
set time server
command to set the TIME server address.
Syntax:
The syntax for this command is:
set time server <ip address>
Example:
Related Commands:
Use the
show time parameters
command to display the time status and parameters.
set timezone
User level: privileged, supervisor.
Use the
set timezone
command to set the time zone for the switch and set the time
difference of the device relative to the Coordinated Universal Time (UTC / GMT).
The minutes parameter can be set only to 30.
Syntax:
The syntax for this command is:
set timezone <zone-name> {<hours> | <hours:min>}
Syntax Description
<ip address> IP address of the TIME server.
W310-1# set time server 192.49.53.68
The Server Ip has been set to 192.49.53.68
Syntax Description
<zone-name> Three-character name of time zone, for example, EST, GMT
<hours> The difference between the time zone and GMT