Avaya W310, Command Reference Manual, Page: 293 / 440

Chapter 11
Avaya W310 Command Reference Guide 277
Example:
set port powerinline
User level: privileged, supervisor.
Use the
set port powerinline
command to enable or disable the load detection
process and power delivery for the port.
Syntax:
The syntax for this command is:
set port powerinline <module/port> {enable | disable}
Example:
W310-1# set port point-to-point admin status 1/1 force-true
port 1/1 point to point admin status is set to force-true
Syntax Description
<module/port> 1/port number or range of port numbers. To specify a range of
ports, use a hyphen between the two port numbers. For example:
•
To specify port 1, type 1/1
• To specify ports 1 to 5, type 1/1-5
enable Enables load detection process for port.
disable Disables load detection process for port.
W310-1# set port powerinline 1/1-3 enable
Load detection process on ports 1/1-3 is enabled