Avaya W310, Command Reference Manual

Page: 275 / 440

Chapter 11
Avaya W310 Command Reference Guide 259
set port dot1x port-control
Use the
set port dot1x port-control
command to set the dot1x parameter per
port.
Syntax:
The syntax for this command is:
set port dot1x port-control <module/port> {force-unauthorize |
auto | force-authorize}
Example:
Syntax Description
<module/port> 1/port number or range of port numbers. To specify a range of
ports, use a hyphen between the two port numbers. For example:
•
To specify port 1, type 1/1
• To specify ports 1 to 5, type 1/1-5
{force-unauthorize |
auto | force-
authorize} force-unauthorize - the port is always in blocking state
auto - forwarding or blocking state depends on authorization
outcome
force-authorize - the port is always in forwarding state
W310-1(super)# set port dot1x port-control 1/3 force-
authorize
port 1/3 control was set to force-authorize