Avaya W310, Command Reference Manual, Page: 207 / 440

Chapter 10 W310 Policy Commands
Avaya W310 Command Reference Guide 191
Example:
ether-type-rule
User level: privileged, supervisor.
Command Mode: IP Rule Table
Use the
ether-type-rule
command to create or enter an ether type rule.
Use the [no] form of this command to delete the rule.
Syntax:
The syntax for this command is:
[no] ether-type-rule {<index> | default}
Example:
W310-1(super/ACL 310/ether type rule 21)# ether-type 50
Done!
W310-1(super/ACL 310/ether type rule 21)#
Syntax Description
<index> Number of the rule. The range is from 1 to 9999.
default Use the default rule.
W310-1(super/ACL 330)# ether-type-rule 21
W310-1(super/ACL 330/ether type rule 21)#