• If you disconnect the networking switch, Avaya Vantage
™
continues to work without a reboot.
If Avaya Vantage
™
is already connected to a PoE networking switch and you connect the power
adapter to the device, Avaya Vantage
™
continues to work without a reboot.
Starting your Avaya Vantage
™
device
About this task
Use this procedure to connect your Avaya Vantage
™
device to a power source and the network.
After you connect the device to a power source, the device starts up and initializes.
After the Avaya Vantage
™
device powers up and initializes, it attempts to get the file server
address from DHCP or LLDP, if configured. Otherwise, it attempts Device Enrollment Services
discovery and one of the following occurs:
• Device Enrollment Services provides the file server address to the device automatically. In
this case, no further action is required.
• The device prompts for an enrollment code for Device Enrollment Services. After you provide
the enrollment code, Device Enrollment Services redirects the device to the file server.
Before you begin
If Device Enrollment Services is configured to use an enrollment code, ensure that you have the
code. Device Enrollment Services supports an 8 or 12-digit enrollment code. For more information
about enrollment codes, see
Using Avaya Device Enrollment Services to Manage Endpoints
.
Procedure
1. To use a wired Ethernet connection, plug one end of an Ethernet cable into the LAN port at
the back of Avaya Vantage
™
and the other end into an available LAN port on your network.
If PoE is supported, Avaya Vantage
™
powers up and starts to initialize.
2.
(Optional)
Connect a power adapter to the USB Type-C power adapter port at the back of
the device and plug the power adapter into an electrical outlet if:
• Your network does not support the 802.3at (PoE) or 802.3af (PoE) injector specification.
• You want to use a Wi-Fi connection.
The device powers up.
3.
(Optional)
If prompted, enter the Device Enrollment Services enrollment code.
After you enter the code, Device Enrollment Services redirects the device to the correct file
server. If you do not enter the enrollment code and tap
Cancel
instead, the Device
Enrollment Services process is canceled. You can provide the file server address manually.
Result
When the device successfully connects to the network and obtains the file server address from
DHCP, LLDP, or Device Enrollment Services discovery, the device takes you to the Home screen.
Starting your Avaya Vantage
™
device
April 2021
Using Avaya Vantage
™
35
