Avaya S8730, Maintaining Manual, Page: 21 / 64

Chapter 4: Adding and replacing an MAS
port board
MAS port boards
Dialogic port boards are pre-installed in any new MAS (model 03) server that uses an analog,
Digital Set Emulation (DSE), E1–QSIG, or T1–QSIG switch integration protocol. Each server
can have only one type of board installed. The server supports only PCI Express (PCI-e)
Dialogic cards. Dialogic cards used in the S3400 and S3500 servers do not use the PCI-e form
factor and cannot be transferred to the S8730 server. The S8730 supports the following
Dialogic boards:
Protocol Ports per MAS Supported boards Maximum
number
Analog 12 – 36
• Dialogic D/120JCT-
LS-EW 12–port board
• Dialogic D/120JCT-
LS-EWEU (Europe)
12–port board
3
4 – 12
• Dialogic D/41JCT-LS-
EW 4–port board
• Dialogic D/41JCT-LS-
EWEU (Europe) 4–
port board
2
Digital Set
Emulation 8 – 24 Dialogic D/82JCT-U-EW 3
E1–QSIG 30 – 90 Dialogic D/600JCT-E1120–EW 3
T1–QSIG 23 – 69 Dialogic D/480JCT-T1–EW 3
Maintaining the Avaya S8730 Server for Modular Messaging June 2009 21