Avaya S8700-Series, Installing And Configuring

Page: 75 / 122

Setting locations (if necessary)
Issue 8 May 2009 75
Setting locations (if necessary)
After you set the rules for daylight savings time, you must set the locations for all port networks.
Port networks can be in different time zones. Use SAT commands to set the locations for the
port networks.
1. Type
change locations
and press Enter .
2. In the ARS Prefix 1 Required for 10-Digit NANP Calls? field, type y .
The system displays the location information.
3. Click Submit to save the changes.
Note:
Note:
The location of a port network is defined on the Cabinet SAT screen (
change
cabinet X
). The location of a network region is defined on the
ip-network-region SAT screen (
change ip-network-region X
).The
location of an H.248 media gateway is defined on the change media-gateway
SAT screen (
change media-gateway X
). The Location field in the
ip-network-region SAT screen is part of the association to the
daylight-savings-rule by which a IP phone behaves.
change locations Page 1 of 5
LOCATIONS
ARS Prefix 1 Required For 10-Digit NANP Calls? y
Number Name Timezone Daylight-Savings Number Plan
Offset Rule Area Code
1
Main + 00:00 0
2 CA - 02:00 0
3 :
4 :
5 :
6 :
7 :
8 :
9 :
10 :
11 :