Avaya S8700-Series, Installing And Configuring

Page: 62 / 122

Chapter 5: IP interface translations
62 Installing and Configuring the Avaya S8500-Series Server
Verifying connectivity to the server
1. Open the System Management Interface and log on as craft .
2. From the Administration menu, click Server (Maintenance) .
3. On the left navigation menu, click Ping and select Other server(s) , All IPSIs , UPS(s) ,
Ethernet switches to verify connectivity to these units.
4. Click Execute Ping .
5. Verify that all endpoints respond correctly.
Verifying that the IPSIs are translated
Note:
Note:
You must be on the active server to use SAT commands.
1. Use SSH to open a SAT session on the server.
2. Type
list ipserver-interface
and press Enter .
3. Verify that all ISPI circuit packs are translated.
Upgrading the IPSI firmware version (if necessary)
You might need to upgrade the firmware on some or all the IPSIs. All IPSIs must have the same
firmware load.
1. IPSI Version .
2. Select Query All and click View .
3. Verify the firmware release for each IPSI.
4. If an upgrade is required, follow the procedures in Firmware Download Procedures at the
Download Center on the Avaya Support Web site.