Avaya S8700-Series, Installing And Configuring

Page: 46 / 122

Chapter 4: Server configuration
46 Installing and Configuring the Avaya S8500-Series Server
l
Set Modem Interface
l
Update System
Use your pre-installation planning forms to enter information on these pages. For more
information on these pages, see
Configuring the server manually on page 42 or click Help
at the bottom of each page.
6. When you complete all the fields, click Continue on the Update System page. The Update
System page displays each configuration task as it completes it and the system displays
following message:
System modifications completed.
Avaya Installation Wizard
About the Avaya Installation Wizard
Use the Avaya Installation Wizard to:
l
Set the date, the time, and the time zone
l
Configure the server
l
Install the RFA license file
Note:
Note:
To install the license file the server does not have to be connected to the
reference IPSI. However, you have only 30 minutes before the system checks the
serial number on the IPSI. To add another 30 minutes, type
reset system 1
and press Enter in a SAT session to restart the Communication Manager
software.
l
Install the Avaya authentication files
l
Install software updates
l
Set the product ID
l
Set the alarming
The Avaya Installation Wizard cannot be used to configure:
l
Extra Large (XL) or Standard Memory Configuration (S8720 only)
Note:
Note:
To configure XL or Standard Memory, use the Configure Server in the System
Management Interface. For more information see,
Configuring memory for an
S8720 Server on page 49.
l
Encryption setting for Software Duplication (S8720 or S8730 with Software Duplication)