Avaya S8510, Manual, Page: 74 / 84

Job Aid: Replacing the SAMP on the Avaya S8510 Server
74 Job Aids for Field Replacements (FRUs) for the Avaya S8510 Server
Figure 24: Replacing the cover on the S8510 server
2. Slide the cover forward.
3. Push the latch down to lock (Note 2 in Figure 24 ).
4. Rotate the latch release lock clockwise to secure the cover (Note 1 in Figure 24 ).
Install the replacement S8510 server in the rack
To install the replacement S8510 server back in its rack:
1. Install the server onto the slide rails in the rack (see Figure 21: Remove the S8510 server
from the rack on page 69.
2. Reconnect the Ethernet cable to the dual NIC at the back of the server.
3. Reconnect the power cord to the SAMP at the back of the server.
4. Reconnect the USB modem cable to the USB port on the SAMP at the back of the server.
Figure notes:
1. Latch release lock 3. Slide the cover back then lift straight
up to remove.
2. Push the latch down to lock. 4. Align the cover with the J hooks on
each side of the server.
1
2
3
hw8510cr LAO 021008