Avaya S8510, Manual, Page: 33 / 84

03-602953 Issue 1 June 2008 33
Job Aid: Replacing the hard drive on the
Avaya S8510 server
!
Important:
Important:
Always check the Avaya Support Website for Product Support Notices at http://
support.avaya.com/japple/css/
japple?PAGE=ProductArea&temp.productID=162774
.
This Job Aid contains the procedures to replace either hard drive on an Avaya S8510 server
running Communication Manager Release 5.1.
!
Important:
Important:
The S8510 server is configured with two (2) drives that are RAID1-capable
(mirrored for speed and reliability) and hot-swappable (do not have to power
down the server to replace either drive).
However, you cannot remove both drives at the same time. Also, do NOT remove
the healthy, active hard drive. If you inadvertently remove the active hard drive,
you
cannot plug it back in. See the Warning in Remove the defective hard drive
from the S8510 server on page 38.
Replacement hardware and tools
•
S8510 Hard Disk (250BG HDD), Material ID 700455512
•
Services laptop and crossover cable
•
Electrostatic wrist ground strap and mat
•
Key to server keylock on front bezel
Note:
Note:
The server ships with the front bezel unlocked and the keys taped inside it. The
customer decides whether to lock the front bezel or not. When you are finished
with the replacement procedure, please leave the server’s front bezel as you
found it.