Job Aid: Replacing the Avaya S8510 server
24 Job Aids for Field Replacements (FRUs) for the Avaya S8510 Server
3. Wait until the system displays the message, "...unpacked successfully," and click
Continue
.
The
Manage Updates
page displays.
4. If the update that you want to activate shows
unpacked
in the
Status
column, select the file
(radio button) and click
Activate
.
The status of the activation process displays on the screen. If a reboot is required, the
system automatically reboots.
5. Click on
Yes
.
Wait until the system displays the Continue button.
6. Click
Continue
.
Configure network parameters
If you backed up the server data to a Local PC Card / Compact Flash card, omit this section and
continue with
Verify connectivity to the backup files
on page 25. Otherwise, complete this entire
section.
Note:
Note:
You must have the host name, subnet mask, and IP addresses of the server and
default gateway to complete this procedure.
To configure the network parameters on the server:
1. At the Maintenance Web Pages select
Server Configuration > Configure Server
.
The
Configure Server
wizard launches.
2. Click
Continue
until you get to the "Specify how you want to use this wizard" screen.
3. Select
Configure individual services
and click
Continue
.
4. Click
Set Identities
from the "Configure Individual IP Services" list on the left.
The
Set Identities
page displays.
5. Fill in the host name with the name of the server.
6. Click
Continue
.
The
Configure Interfaces
page displays.
7. Fill in the correct server and gateway IP addresses and the subnet mask.
8. Click
Change
to update the system files.
Note:
Note:
If an Action Cancelled message appears before the Success message, refresh
the screen and click
Change
again.