2. In the
System Configuration
navigation, in the
System Settings
section, click
Language Mapping
.
3. On the
Language Mapping
page, in the
Language
list, select the supported
language.
4. In the
PMS Code
box, type the PMS code for that language.
5. Click
Add
.
6. To edit the Language Mapping, click
Edit
beside the mapping you want to edit.
7. To delete a Language Mapping, click
Delete
beside the mapping you want to
delete.
Configuring Remote Message Notification Setting
About this task
The Administrator can configure the system to call a pre-defined external number to notify the
user of a new voice message. Users can do these steps themselves if access is granted
through their individual Mailbox Web page. Up to three numbers can be set per mailbox.
Prerequisites:
• Obtain the external call prefix number(s), pause duration (if necessary), and the remote
notification numbers from the customer.
Procedure
1. On the
Web Configuration
main navigation bar, click
System Configuration
.
2. In the
System Configuration
navigation, in the
System Settings
section, click
Remote Message Notification Setting
.
3. On the
Remote Message Notification Setting
page, in the
Mailbox ID
box, key
in the ID.
4. Click
Search
.
5. In the
Enable Notification
box, select
YES
.
6. In the
Phone#1
box, type the extension number (internal DN) OR The external
prefix followed by "," then the phone number (external).
7. Click the check boxes beside
Phone#2
and
Phone#3
accordingly in order to key
in the next numbers.
8. Click
Save
to save your changes.
Avaya Hospitality Messaging Server 400 system settings commissioning
88 Avaya Hospitality Messaging Server 400 Installation and Commissioning
March 2012
