3. In the left pane, in the
System Settings
section, to the right of
General Setting
,
click
Pg 1
.
4. In the right pane, in the
Ring Duration
section, click
Edit
.
5. From the
AWU
list, select the required number of seconds.
6. From the
RMN
list, select the required number of seconds.
7. Click
Update
to save the changes.
OR
Click
Cancel
to discard the changes.
8. Restart HMS 400 for the changes to take effect.
Variable Definitions
Variable
Value
AWU list
Select the number of seconds for an
automatic wake up call to ring before the
system considers the call unanswered.
RMN list
Select the number of seconds for remote
notification call to ring before the system
considers the call unanswered.
Configuring default check in language
About this task
When a customer checks into the hotel, the hotel PMS normally configures the preferred
language for that customer. If the preferred language information is not provided, the HMS 400
system uses the Default Check In Language that you configure in the following procedure.
Procedure
1. On the
Web Configuration
main navigation bar, click
System Configuration
.
2. In the
System Configuration
navigation, in the
System Settings
section, click
Pg
1
beside General Setting.
3. In the
Default Check In Language
section, click
Edit
.
4. In the
Language
list, select the default language.
Only installed languages are available.
Configuring default check in language
Avaya Hospitality Messaging Server 400 Installation and Commissioning
March 2012 73
