Avaya programming and use, Installation And Use Manual, Page: 441 / 468

E-1
E
Flow Charts
E
System Programming Flow Chart—How to Use
To use the following sets of Flow Charts, follow these instructions first:
Place the Programming Overlay on the dial pad of the system display phone at extension 10 or 11.
■
To Start System Programming:
— Press
f00
— Press
s s
■
To End System Programming:
— Press
f00
■
To Use a Specific Procedure:
— Dial
#
and a three-digit procedure code.
(Example:
#101
for System Date)
■
To Cycle through System Programming Procedures:
— Press
N
or
P
■
To Cycle Through Available Settings:
— Press
D
or
d
■
To Return to Factory Setting:
— Press
r
Procedures #399, #609, and #728—shown in dashed boxes—are skipped when cycling
Procedures # 207, #313, #314, and #315—shown in square dotted boxes—are for pools
2.0
3.0
= Factory setting
= Button with lights required
= Button with lights recommended
= PARTNER ACS Revision 2.0 or later
= PARTNER ACS Revision 3.0 or later
Icon Description
6.0
= PARTNER ACS Revision 6.0 or later