Avaya programming and use, Installation And Use Manual, Page: 329 / 468

Using Auxiliary Equipment
Contact Closure Adjunct
9-13
Contact Closure Operation Type (#613)
9
Use this feature to specify how long the Contact Closures remain active when they are activated.
A Contact Closure can be activated for 1, 3, or 5 seconds; or the Contact Closure can be set to
toggle.
For example, if a Contact Closure that controls a door lock has a Contact Closure Operation Type
of “5-Seconds On,” the door lock is released for 5 seconds when a user activates the Contact
Closure. If the Contact Closure has a Contact Closure Operation Type of “Toggle,” the Contact
Closure must be activated and deactivated. One user can activate the Contact Closure and
another user can deactivate it (provided both users are included in the Contact Closure Group
for that Contact Closure), or the same user can both activate and deactivate the Contact
Closure.
Programming
9
To specify the Operation Type for a Contact Closure:
1. Press
f00ss#613
at extension 10 or 11.
2. At the
Contact Number:
prompt, enter the number (1 or 2) for the Contact Closure.
The display shows the current setting for that Contact Closure.
3. Press
D
or
d
until the appropriate value appears, or press
r
to return to
the default setting:
■
1 = 1-Second On
■
2 = 3-Seconds On (the factory setting)
■
3 = 5-Seconds On
■
4 = Toggle
4. To assign the Operation Type for the other Contact Closure, press
n
or
p
, and
repeat Step 3.
5. Select another procedure, or exit programming mode.