Avaya programming and use, Installation And Use Manual, Page: 292 / 468

PARTNER
®
Advanced Communications System Installation, Programming, and Use
Recall (F03)
8-54
■
You can press
S
to insert a Recall signal in an Auto Dial or Speed Dial number, provided
it is the first character in the stored number.
■
Recall is ignored on T1 lines.
Programming
8
To program a Recall button:
1. Press
f00
.
2. Press a programmable button.
3. Press
f03
.
4. Program another button for this extension, or exit programming mode.
Using Recall on a System Telephone
8
To access a PBX, central office, or Centrex feature (such as Call Waiting) while active on an
outside line:
1. Press the programmed button or
f03
.
2. Enter the access code for the feature (if required).
3. To return to your original call, press the programmed button or
f03
again.
Using Recall on a Single-Line Telephone
8
To access a PBX, central office, or Centrex feature (such as Call Waiting) while active on an
outside line:
1. Press the switchhook (or press the Recall or Flash button on a feature telephone that has
one).
You hear intercom dial tone.
2. Press
#03
.
3. Enter the access code for the feature (if required).
4. To return to your original call, press the switchhook (or press the Recall or Flash button on a
feature telephone) again.