Avaya programming and use, Installation And Use Manual, Page: 239 / 468

Overview
8-1
8
Programming & Using Telephone
Features
8
Overview
8
You can program many of the system’s features right from your telephone. When you program a
feature from your telephone, you are using Extension Programming.
The features discussed in this chapter are features often programmed by individual users.
However, they can be programmed by the System Administrator as well from a system display
telephone at extension 10 or 11. Some of the features only show the instructions for using the
feature because the feature usually is programmed by the System Administrator.
Extension Programming
8
Extension Programming is the programming that you perform at your own telephone, not at the
telephone at extension 10 or 11.
To program at an extension, use the following procedure:
1. To start programming, dial
f00
.
The green lights next to buttons on which lines or pools are assigned for the extension show
the current Line Ringing settings. You can program the remaining buttons with telephone
numbers, extension numbers, or system features.
2. To assign a name to the extension, press left
i
and enter the character codes. See
“Extension Name Display” on page 5-4 for the codes.
3. Program features as described in this chapter.
4. To erase the current programming from a button, press the button, then press
!
.
5. To exit programming mode, do one of the following:
■
Press
f00
.
■
Lift the handset off-hook, then place it back in the cradle.