Avaya programming and use, Installation And Use Manual, Page: 166 / 468

PARTNER
®
Advanced Communications System Installation, Programming, and Use
Voice Interrupt On Busy (#312)
4-68
Considerations
4
■
This feature applies only to MLS, PARTNER, and TransTalk telephones.
■
You can program single-line telephones for any ring pattern, but they ring with Pattern 1 only.
■
You must program MLC 6 telephones with Pattern 1. If they are programmed with another
pattern, they do not ring.
■
Since only one audible alert can be heard at a station at one time, the ringing pattern present
at that extension that has multiple lines alerting is for the line that rang first. Once the call is
answered, the extension begins ringing by using the pattern associated with the next alerting
line for that extension.
■
Incoming calls that are ringing at a pool button ring with the pattern assigned to the line. Lines
within a pool may be assigned individual ring patterns.
Programming
4
1. Press
f00ss#209
at extension 10 or 11.
2. At the line prompt, enter the number of the line to be programmed with the pattern.
3. At the pattern prompt, enter a ringing pattern number (1–8; 1 is the factory setting), or press
D
until the desired value appears. The display looks like this:
RING PATTERN LXX
PATTERN X
4. To set the ring pattern for another line, press
n
or
p
until the line number appears
on the display. Then repeat Step 3.
5. Select another procedure, or exit programming mode.
Voice Interrupt On Busy (#312)
4
Use this feature to identify extensions that can receive Voice Interrupt On Busy calls. A Voice
Interrupt On Busy call is a special intercom call that lets a user (the originator) interrupt and
speak to another user (the recipient) who is busy on an intercom or outside call. When Voice
Interrupt On Busy is initiated, the recipient hears two beeps before hearing the originator’s voice.
The third party to whom the recipient is speaking probably can hear both the beeps and the faint
sound of the originator’s voice. This feature typically is used by the receptionist to alert the boss to
an important incoming call or event when the boss is already on a call.
Voice Interrupt On Busy is available only on system telephones.