manualshive.com logo in svg

Avaya programming and use, Installation And Use Manual, Page: 127 / 468

Share
Download
Avaya programming and use Installation And Use Manual Download Page 127

Programming System Options

Display Language (#303)

4-29

Programming

4

To program Direct Inward Dialing (DID), you must use the PARTNER ACS R6.0 PC Administration 
software.

Display Language (#303)

4

Use this feature to change the language in which display messages appear if the extension has a 
system display telephone. The language is set for each extension, so telephones in the same 
system can display different languages.

Considerations

4

If SMDR is used, the call report header is printed in the language specified for extension 10.

Programming

4

To change the Display Language setting for an extension:

1.

Press 

f00ss#303 

at extension 10 or 11.

The current Display Language displays.

2.

Enter the number of the extension to be programmed.

3.

To change the Display Language, press 

D

 until the appropriate value appears.

■

1 = English (the factory setting) 

 

■

2 = Spanish

■

3 = French

4.

To program another extension, press 

n

 or 

p

 until the extension number appears 

on the display. Then repeat step 3.

5.

Select another procedure, or exit programming mode.

Summary of Contents for programming and use





















































































































































































































































































































































































































































































Reviews:

No comments