Avaya programming and use, Installation And Use Manual, Page: 107 / 468

Programming System Options
Call Coverage Rings (#116 or #320)
4-9
Programming
4
For Call Coverage Rings (#116)—Release 2.0 only
4
To change the number of times a call rings at an extension before it is sent to the covering
extension:
1. Press
f00ss#116
at extension 10 or 11.
2. Enter the number of the extension to be programmed.
3. Enter a different setting (1–9; 2 is the factory setting).
4. To program another extension, press
n
or
p
until the extension number appears
on the display. Then repeat step 3.
5. Select another procedure, or exit programming mode.
For Call Coverage Rings (#320)—Release 3.0 or Later
4
1. Press
f00ss#320
at extension 10 or 11.
The current ring setting displays.
2. Enter the number of the extension to be programmed.
3. Press
D
until the appropriate value appears (1–9; 2 is the factory setting).
4. To program another extension, press
n
or
p
until the extension number appears
on the display. Then repeat step 3.
5. Select another procedure, or exit programming mode.