Avaya programming and use, Installation And Use Manual, Page: 101 / 468

Programming System Options
All Lines Busy Event—Release 6.0 and Later
4-3
All Lines Busy Event
—Release 6.0 and Later
4
Use this feature to determine how often all lines administered in the system are busy. When all
lines are busy, a record is generated in the PARTNER ACS event log. This record will include the
time of day when all lines were busy and length of time this event lasted. When at least one of the
lines is no longer busy, an All Lines Cleared event is generated in the PARTNER ACS event log.
You can use this feature to determine if your PARTNER system has enough lines.
Considerations
4
■
All Lines Busy Event is available in Release 6.0 and later systems.
■
You must use the PARTNER ACS R6.0 PC Administration software to program the All Lines
Busy Event feature and access the PARTNER ACS event log.
■
Every 10 seconds the PARTNER system checks automatically whether all lines are busy.
Programming
4
To change the All Lines Busy Event setting, you must use the PARTNER ACS R6.0 PC
Administration software.
Automatic Extension Privacy (#304)
4
Use this feature to prevent a user from joining an active call at an extension. When Automatic
Extension Privacy is Assigned for an extension, other users cannot join active calls at that
extension. This feature is typically used for single-line telephones and extensions connected to fax
machines, modems, and credit card scanners, which make and receive data calls that should not
be interrupted. This feature can provide the Privacy (F07) function for single-line telephones.
Considerations
4
■
If you want to be able to intercept calls routed to an auxiliary device—such as an answering
machine, a voice messaging system, or an auto attendant—make sure Automatic Extension
Privacy is Not Assigned for the auxiliary equipment extension.
■
Single-line telephones and system telephones without a programmed Privacy button cannot
override this feature once it is assigned to an extension.
■
If Automatic Extension Privacy is Assigned at an extension, the green light is lit
automatically after programming the Privacy button to indicate that Privacy is currently active.
■
Automatic Extension Privacy applies only to active calls. Any user can retrieve a held call
unless Exclusive Hold is used.