manualshive.com logo in svg

Avaya PARTNER ACS PC Administration, Getting Started Manual

Share
Download
Avaya PARTNER ACS PC Administration Getting Started Manual Download Page 10

 1 Getting Acquainted

10

New Features in this Release

Getting Started

New Features in this Release

In addition to supporting all system programming and remote administration 
features already available in PARTNER ACS R6.0 PC Administration, 
PARTNER ACS R7.0 PC Administration supports the following features and 
capabilities:

• PARTNER ACS R7, R6, R5, R4, and R3 Support

PARTNER ACS R7.0 PC Administration provides the capability to program 
PARTNER ACS R7, R6, R5, R4, and R3 systems.

• Support for the Admin Port on a PARTNER ACS R7.0 Processor Module

Using PARTNER ACS R7.0 PC Administration, you can also connect to a 
PARTNER ACS R7.0 system via the Admin port on the PARTNER ACS 
R7.0 processor module. You can connect to the Admin port either directly 
from the COM port of your PC or via an external modem that is connected 
to the Admin port.

• Loudspeaker Paging Line Administration

Unlike previous PARTNER processor modules, the PARTNER ACS R7.0 
processor module has no dedicated Loudspeaker Paging System port. 
Instead, you can connect your loudspeaker paging system to any line port 
on the processor module. When the loudspeaker paging system is 
administered to a line port, that line is disabled on the PARTNER system.

If your loudspeaker paging systems requires a “dry contact 
relay,” you must connect the loudspeaker paging system into 
line jack 5 on the PARTNER ACS R7.0 processor module.

• Enhanced Backup for PARTNER ACS R7.0

For PARTNER ACS R7.0, you can now save a back up of the translations 
on either the PARTNER ACS R7.0 processor module or a backup/restore 
card.

PCAdminGS.book  Page 10  Wednesday, May 19, 2004  1:28 PM

Summary of Contents for PARTNER ACS PC Administration

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands