Avaya P333R, User Manual

Page: 234 / 270

Chapter 7 Cajun Campus CLI - Layer 3
214 Avaya P333R User’s Guide
The syntax for this command is:
set qos dscp-name <dscp> <name>
Example:
Router-N(configure)# set qos dscp-name 10 "special"
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
set qos dscp-agg-index Command
Use the
set qos dscp-agg-index
command to configure the DSCP aggregate
index.
The syntax for this command is:
set qos dscp-agg-index <dscp> <agg-index>
Example:
Router-N(configure)#set qos dscp-agg-index 5 3
set qos trust Command
Use the set qos trust command to configure which of the incoming packet's priority
parameters should be considered when determining the new assigned priority. You
can configure the P333R to trust either the cos (the 802.1p priority), the dscp (the
DSCP value), both, or neither. The default value is trust-dscp.
The syntax for this command is:
set qos trust {untrusted | trust-cos | trust-dscp | trust-
cos-dscp}
Example:
Router-N(configure)# set qos trust cos-dscp
dscp DSCP entry (0-63)
name entry name
dscp (0-63)
agg-index (0-63)