Avaya P333R, User Manual

Page: 164 / 270

Chapter 6 Avaya CLI - EZ2route
144 Avaya P333R User’s Guide
Examples:
Console> ip EZ2route router 192.168.19.1
Console> ip EZ2route router 192.168.20.1 00.40.0d.89.61.17 23
ip EZ2route group Command
Use the
ip EZ2route group
command to define group rules. The groups
specify whether traffic from certain sources will be routed to destinations.
By default all traffic is routed by the EZ2route (given that it should be routed by a
boosted router, and its IP destination is a known host). If you wish to prevent the
EZ2route from routing certain traffic, a "do-not-route" group should be configured
for this traffic. More complex configurations can be defined using a combination of
"route" and "do-not-route" groups. The EZ2route will always use the first matching
group. The group order is determined by the group indices configured by the user.
The syntax for this command is:
ip EZ2route group
<group index> <action> <source IP subnet>
<source mask> <destination IP subnet> <destination mask>
Examples:
Console> ip EZ2route group 10 do-not-route 10.1.0.0
255.255.0.0 3.4.5.6 255.255.255.255
Console> ip EZ2route group 20 route 10.1.0.0 255.255.0.0
10.2.0.0 255.255.0.0
Console> ip EZ2route group 30 do-not-route 0.0.0.0 0.0.0.0
10.2.0.0 255.255.0.0
<group index>
Integer
<action>
route | do-not-routes
<source IP subnet>
source IP subnet
<mask>
source mask
<destination IP subnet>
destination IP address
<destination mask>
destination mask