Avaya P333R, User Manual

Page: 154 / 270

Chapter 5 CLI – Layer 2
134 Avaya
P333T-PWR User’s Guide
Supervisor Level Commands
This level includes all the commands of the User and Privileged Levels (including
all
show
and
set
commands).
username
Use the
username
command to add a local user account. You can only do this
from within the Supervisor Level.
The syntax for this command is:
username <name> password <passwd> access-type{read-only|read-
write|admin}
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
no username
Use the
no username
command to remove a local user account.
The syntax for this command is:
no username <name>
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
name New user name
passwd User’s password
access-type Access type definition - read only, read-write or
administrator