Avaya P333R, User Manual

Page: 149 / 270

Chapter 5 CLI – Layer 2
Avaya
P333T-PWR User’s Guide
129
copy tftp module-config
Use the
copy tftp module-config
command to download the switch-level
configuration from a saved file into the current NVRAM running configuration of a
switch, via TFTP. To use this command, you need to have an active tftp server, and
to create a file into which to download the data. If CajunView is running, an
additional tftp server is not required.
Note: You should perform the
nvram initialize
command prior to the
copy tftp
operation.
The syntax for this command is:
copy tftp module-config <filename> <ip>
Example:
P330-N# copy tftp module-config c:\config\switch1.cfg
192.168.49.10 5
copy tftp EW_archive
Use the
copy tftp EW_archive
command to download the P330 Device
Manager application into the switch via TFTP. To use this command, you need to
have an active TFTP server, and to create a file into which to download the data. If
CajunView is running, an additional TFTP server is not required.
The syntax for this command is:
copy tftp EW_archive <filename> <ip> <mod_num>
Example:
P330-N# copy tftp EW_archive c:\p330\p330web201
192.168.49.10 5
filename The file name (full path)
ip The ip address of the TFTP server
filename Embedded Web Manager image file name (full path)
ip The ip address of the TFTP server
mod_num Target switch number