Avaya one-X Deskphone SIP 9620C Installation Manual Download Page 87

Page: 87 / 99

H323 Telephone Installation

Page 87

Issue 23e (Friday, February 15, 2019)

IP Office™ Platform 11.0

Comments on this document? [email protected]

TLS Support:

7. TLS Support

For IP Office Release 10 and higher, it is possible to use TLS for the connection of 9600 telephones. When enabled, TLS is
used for the TCP RAS and call signalling between the telephone and the IP Office system.

Supported with the 9608, 9611, 9621 and 9641 models.

Requires the phone to be running 6.6029 firmware or higher.

Requires the telephone to use a non-default CRAFT password.

The use of TLS by the system can be set as either optional or enforced.

Process Summary

1. Customize the Craft process password

2. Add the identity certificate

3. Enable TLS on the IP Office system

4. Enable TLS on the telephone

Additional Notes

For phones using TLS:

HTTPS file server connection uses port 8411. File server need same certificate.

If remote and also using SRTP, the telephone uses port 8443 for backup/restore.

7.1 Changing the CRAFT Password

TLS operation cannot be enabled if the telephones are using the default CRAFT process password. The password can be
changed as follows:

If the telephones are downloading a 46xxsettings.txt file from a file server:

1. Add a

SET PROCPSWD

entry to the 46xxsettings.txt file followed by the password that should be used.

2. Cause the telephones to reboot in order to reload the settings files and use the new setting.

If the telephones are using the IP Office auto-generated settings:

1. Receive the IP Office configuration and locate the

NoUser

user.

2. In the

Source Numbers

tab, add

SET_46xx_PROCPSWD=

followed by

the new password. Note that the

command is case sensitive.

3. Save the configuration and reboot the system.

To view the auto-generated file setting:

1. Using a browser, enter

http://<server_address>/46xxsettings.txt.

2. The file should include a line starting

SET PROCPSWD

followed by the new password.

Summary of Contents for one-X Deskphone SIP 9620C




































































































Search results

Summary of Contents for one-X Deskphone SIP 9620C

Reviews:

Avaya one-X Deskphone SIP 9620C, Installation Manual, Page: 87 / 99

Search results

Summary of Contents for one-X Deskphone SIP 9620C

Reviews: