Troubleshooting Guidelines
52 9600 Series SIP IP Telephones Release 2.0 Installation and Maintenance Guide
DTMF Tones
SIP telephones send DTMF tones according to the SEND_DTMF_TYPE parameter setting. The
default setting of this parameter sends DTMF "tones" as "telephone event" RTP packets per
RFC 2833. Whether a non-SIP telephone hears these DTMF tones depends on whether the
Avaya Communication Manager media resource converts the "telephone event" RTP packets
into audio RTP packets.
Power Interruption
If power to a 9600 Series SIP IP Telephone is interrupted while the telephone is saving the
application file, the HTTP/HTTPS application can stop responding. If this occurs, restart the
HTTP/HTTPS server.
Installation Error and Status Messages
The 9600 Series SIP IP Telephones issue messages in the currently selected language, or if the
telephone is logged off, in the language specified by the SYSTEM_LANGUAGE parameter
value. If English is not the selected language, the telephone displays messages in English only
when they are associated with local procedures, for example, the
VIEW
Craft local procedure.
Most of the messages in
Table 2
display only for about 30 seconds or less, and then the
telephone resets. The most common exception is
Extension in Use
, which requires manual
intervention.
Table 2: Possible Error and Status Messages During Installation of 9600 Series IP
Telephones
Message
Cause/Resolution
Address
Conflict
CAUSE:
The telephone has detected an IP Address conflict.
RESOLUTION:
Verify administration to identify duplicate IP
Address(es).
Bad Router
CAUSE:
The telephone cannot find a router based on the information in
the DHCP file.
RESOLUTION:
Use static addressing to specify a router address, or
change administration on DHCP, as indicated in the
Avaya one-X
™
Deskphone Edition for 9600 Series SIP IP Telephones Administrator
Guide
.
1 of 2
