Local Administrative Options
44 9600 Series SIP IP Telephones Release 2.0 Installation and Maintenance Guide
Use the following procedure to set the Site-Specific Option Number (SSON).
1. When you select
SSON...
from the Admin Procedures Screen, the following text displays:
where the
setting
is the current system value of DHCP_SSON.
2. To change the setting, press the appropriate softkey(s) and use the dialpad to enter a valid
SSON value between 128 and 255.
3. Press
Save
to store the new setting and redisplay the Admin Procedures screen.
The View Administrative Option
If you are using static addressing and encounter problems, use the following procedure to verify
the current values of system parameters and file versions.
Note:
Note:
Unless otherwise prevented using administration, the user can view but not
change most of the parameters associated with Craft Local Procedures. For
more information about this option, see the applicable user guide(s).
Note:
Note:
If the View Network Information option is not available due to being disabled by
administration, use the
ADDR
option to view IP Addresses. See
Static
Addressing Installation
on page 32. The IP Addresses might have been entered
incorrectly. Verify whether you were provided with correct IP Addresses.
Setting:
